Activating/Deactivating Audio Inputs (Aux1/2); Renaming Audio Inputs (Edit) - Blaupunkt St. Louis MP56 Notice D'emploi Et De Montage

Changing basic settings in the settings menu
Activating/deactivating audio
inputs (AUX1/2)
Audio inputs, to which you are
connecting external audio sourc-
es, must be activated as follows.
➔
Press the softkey
"AUX1") and/or the softkey
(next to "AUX2").
The status of the audio input is
shown on the main line
•
"AUXILIARY ON": The corre-
sponding audio input is acti-
vated and can be selected as
audio source using the SRC
B
button .
•
"AUXILIARY OFF": The corre-
sponding audio input is deac-
tivated. It cannot even be se-
lected as audio source if an
external audio source is con-
nected.
Renaming audio inputs ( EDIT)
If you select an audio input as
audio source, "AUXILIARY 1" or
"AUXILIARY 2" appears on the
A
main line . To change this name:
Note:
The "EDIT" menu item appears
only if you activated the cor-
responding audio input as
described in the preceding
section.
➔
Press the softkey
or the softkey
next to "EDIT").
54
<
(next to
7
A
:
8
for AUX2
;
for AUX (each
The text input for the selected
audio source is shown on the
A
main line . The fi rst character
of the name is fl ashing.
➔
On the rocker switch
edly press or
fl ashing character.
➔
On the rocker switch
to change to the next charac-
ter. The name can have up to
16 characters.
➔
Press the OK button
ish the text input and to store
the name entered.
Note:
To quit the text input without
changing the name, press the
@
ESC button
3
repeat-
to change the
3
, press
A
to fi n-
.