Displaying The Serial Number (Ser Num); Error Table - Blaupunkt St. Louis MP56 Notice D'emploi Et De Montage

Displaying the serial number
( SER NUM)
Every device has a separate serial
number. To display this number:
➔
Press the softkey
"SER NUM").
The serial number is shown on
the main line

Error table

If the device does not function properly, switch the device off and on
again.
If problems still persist, you can easily correct the following problems.
Problem
The menus do not appear
as shown in these instruc-
tions.
The tuner cannot be adjust-
ed to the frequencies listed
in the technical data.
The display shows informa-
tion about the device.
The device is always silent,
even though it is correctly
connected.
If problems still persist, please contact an authorised workshop or the
Blaupunkt customer service (see the last page).
:
(next to
A
.
Possible cause
The device is not set to
your region.
The demo mode is acti-
vated.
The internal amplifi er is
switched off.
Error table
Possible remedy
Set the device to your region
as described on page 26.
Briefl y press the MENU but-
?
ton . Press and hold this
button again for four sec-
onds.
Switch on the internal
amplifi er as described on
page 56.
57