Quickly Reducing The Volume (Mute); Telephone Audio/Navigation Audio - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

Volume
When you have fi nished making your chang-
es,
u press the ESC/DIS button 5.
Quickly reducing the volume
(MUTE)
You can quickly reduce the volume to a pre-
set level.
Briefl y press the On/Off button 3.
u
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefl y press the On/Off button 3
u
again.
Adjusting the mute level
You can adjust the mute level.
u Press the MENU/OK button ;.
u
Press the or
edly until "MUTE LVL" appears on the
display.
Press the MENU/OK button ; to open
u
the menu.
u
Set the mute level with the
ton <.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
u
12
All manuals and user guides at all-guides.com
button < repeat-
or but-
Telephone Audio/Navigation
Audio
Muting during telephone mode
If your car sound system is connected with
a cell phone or navigation system, "picking"
up the phone or a voice output of the navi-
gation system automatically mutes the car
sound system. The call or the voice output
is played back via the loudspeakers of the
car sound system. For this purpose, the cell
phone or the navigation system must be
connected to the car sound system as de-
scribed in the installation instructions.
You can fi nd out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
If you answer a call or a navigation an-
nouncement takes place, the display shows
"TELEPHONE".
Adjusting the volume for telephone
audio/navigation audio
During a telephone call or a voice output of
the navigation, no traffi c announcements
are switched through. The traffi c announce-
ment is not recorded!
You can set the volume level at which the
telephone calls or navigation announce-
ments are mixed in.
Press the MENU/OK button ;.
u
u
Press the or
until "TEL VOL" appears on the display.
Press the MENU/OK button ; to open
u
the menu.
button < repeatedly