Switching The Confi Rmation Beep; Automatic Sound - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

u
Set the desired volume with the
button <.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
u
Note:
You can use the volume control 4 to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confi rmation beep
on/off
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU/OK button ;.
u
button < repeatedly
u
Press the or
until "BEEP ON" or "BEEP OFF" appears
on the display.
u
Switch the BEEP ON or OFF with the
or button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
u
All manuals and user guides at all-guides.com
or

Automatic Sound

This function automatically adjusts the vol-
ume of the car sound system to the vehicle
speed. For this purpose, the car sound sys-
tem must be connected as described in the
installation instructions.
You can adjust the automatic sound in 6 in-
crements from (0 - 5).
u
u
u
u
When you have fi nished making your chang-
es,
u
Press the MENU/OK button ;.
button < repeatedly
Press the or
until "AUTO SD" appears on the display
with the current setting.
Press the MENU/OK button ; to open
the menu.
Set the automatic sound 0 - 5 with the
button <.
or
press the ESC/DIS button 5.
Note:
The optimum setting for the speed-
dependent volume adjustment feature
depends on how noise levels develop in
your particular vehicle. Determine the
perfect value for your vehicle using trial
and error.
Volume
13