General Safety Rules - Bosch GRL 400 H Mode D'emploi

Read all instructions. Failure to follow all instructions listed below may result in
!
WARNING
hazardous radiation exposure, electric shock, fire and/or serious injury. The term
"tool" in all of the warnings listed below refers to your mains-operated (corded) tool or battery-
operated (cordless) tool.
The following labels on your laser tool for your convenience and safety. They indicate
!
WARNING
where the laser light is emitted by the tool. ALWAYS BE AWARE of their location when
using the tool.
The measuring tool is provided with a warning label in English (marked with number 11 in the
Complies with 21CFR 1040.10 and 1040.11 except for deviations pursuant
No. 50, dated June 24, 2007.
Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself.
DO NOT remove or deface any warning or caution labels. Removing labels increases the risk of
exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those specified in this
manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of
looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser beam intentionally or
unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the user could result if the
laser tool fails.
ALWAYS use only the accessories that are recommended by the manufacturer of your laser tool. Use of accessories
that have been designed for use with other laser tools could result in serious injury.
DO NOT use this laser tool for any purpose other than those outlined in this manual. This could result in serious injury.
DO NOT leave the laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do not
modify the product in any way. Modifying the laser tool may result in hazardous laser
radiation exposure.
DO NOT use the laser viewing glasses as safety goggles. The laser viewing glasses are used for improved
visualization of the laser beam, but they do not protect against laser radiation.
DO NOT use the laser viewing glasses as sun glasses or in traffic. The laser viewing glasses
complete UV protection and reduce color perception.
DO NOT use any optical tools such as, but not limited to, telescopes or transits to view the laser beam. Serious eye
injury could result.
DO NOT stare directly at the laser beam or project the laser beam directly into the eyes of others. Serious eye injury
could result.

General Safety Rules

representation of the measuring tool on the graphics page).
SAVE THESE INSTRUCTIONS
GRL 400 H
-5-
to laser notice
d o n o t p r o v i d e