Product Description - Oase BioMaster 250 Notice D'emploi

Masquer les pouces Voir aussi pour BioMaster 250:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

‐  EN  ‐ 
SAVE THESE
INSTRUCTIONS!
Symbols used in these instructions 
C A U T I O N  
 Indicates a possibly hazardous situation.
 Non‐observance  may  lead  to  slight  or  minor  inju‐
ries. 
N O T E  
Indicates information intended to give the user a bet‐
ter understanding. 
 
Additional information 
 A  Reference to a figure, e.g. Fig. A. 
Reference to another section.
PRODUCT DESCRIPTION 
Scope of delivery 
 A  BioMaster Thermo 
BioMaster  Thermo  250:  HeatUp  150 
BioMaster  Thermo  350:  HeatUp  200 
BioMaster Thermo 600: HeatUp 300 
Operating instructions HeatUp 
BioMaster, BioMaster Thermo 
Operating instructions BioMaster 250/350/600,  
BioMaster Thermo 250/350/600 
Holding ring for HeatUp assembly 
Blind plug 
Handle, when the handle is hinged down there are 
two fasteners (10), locked  
Unit head 
Pre‐filter with suction button 
Connection unit with hose connectors, outlet and in‐
let 
10 
Fastener 
11 
Container, filled with filter media 
12 
Rubber feet 
12 
 B  Suction unit, flow‐out unit 
Suction pipe 
Hose 
Flow‐out pipe 
Suction cup 
Hose adapter, adjustable 
Adapter, suction pipe 
Suction basket 
Terminal 
Angle piece 
10 
Union nut 
11 
Short hose section as connecting piece 
for flow‐out pipes (3) 
12 
Water distributor 
13 
Cover cap 
Intended use 
BioMaster 250/350/600, BioMaster Thermo
250/350/600,  referred  to  in  the  following  as 
"unit",  may only  be used as specified in the following: 
• BioMaster 250/350/600: Water filtering and recir‐
culation. 
• BioMaster  Thermo  250/350/600:  Water  heating,
filtering and recirculation. 
• For operation with freshwater or saltwater.
• Operation under observance of the technical data.
The following restrictions apply to the unit: 
• Only use indoors and for aquaristic purposes in the
home (not for commercial use). 
• Only operate with water at a water temperature of
+39 °F to +95 °F.
Function description
Drawn in by a pump in the unit head, the water first
flows through the pre-filter then from the bottom to
the top through the superimposed layers of filter
me-dia. The water then flows back into the
aquarium via the flow-out pipe or water distributor.
Foam filters with different pore densities, and
Hel-X bio-elements serve as filter media.
In units with heater, the water is heated during its
pas- sage through the filter system.
BioMaster 250/350/600, BioMaster Thermo 250/350/600
Quantity 

Publicité

Table des Matières
loading

Table des Matières