KitchenAid KSB655 Instructions page 11

Preparing the Blender for use
6. Put pitcher or accessory jar assembly
onto the Blender base.
NotE:
When properly positioned,
pitcher or accessory jar assembly will rest
completely on Blender base. If not, repeat
steps 3 and 4.
Gap
7. To attach pitcher lid, push firmly into
place. To attach the accessory jar lid,
twist to lock onto the accessory jar.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
No
Failure to follow these
Gap
instructions can result in death,
fire, or electrical shock.
8. Plug power cord into a grounded
3-prong outlet. Blender is now ready
for operation.
9. Before removing the pitcher or
accessory jar from the base, always
press OFF and unplug the power cord.
9