Siemens SITRANS FS230 Notice De Service page 9

Typical system overview
The illustration below shows a typical transmitter and clamp-on sensor flowmeter configuration.
①
FST030 wall mounted transmitter
②
Power cable
③
Upstream sensor cable (1A) Path 1
④
Downstream sensor cable (1B) Path 1
Figure 3-1 Wall mount transmitter overview (Reflect mount)
SITRANS FS230
A5E38755607-AA, 02/2017
⑤
Sensors
⑥
Flow direction
⑦
Ports for I/O, Communications, RTDs
⑧
Path 2 - Upstream (2A), Downstream (2B). (Ports for
Path 2 sensor cables, if applicable.)
7