HP LaserJet 9040 Guide De Mise En Route page 9

1
The smaller measurement is the space that is required to extend the output device with the
HP LaserJet 9040/9050 with typical output device, Tray 4, and Tray 1 installed (top and
side views) to show maximum dimensions
ENWW
2591 mm (102 inches) to extend output
device; 2705 mm (106.5 inches) to
remove output device
2591 mm (102 inches) to extend output
device; 2705 mm (106.5 inches) to
remove output device
attachment bar still attached to the latch under optional Tray 4. The larger measurement is the
space that is required to remove the output device from the product. The additional space
allows enough clearance to remove the attachment bar from the latch under optional Tray 4.
1
1
Prepare printer location 7