Safety Instructions - ESYLUX PD-C180i/16 UC Mode D'emploi

GB INSTALLATIoN AND oPERATING INSTRUCTIoNS
Congratulations on your purchase of this high-quality ESYLUX product.
To ensure correct device operation, please read these installation/operating
instructions carefully and keep them in a safe place for future reference.
1 • SAFETY INSTRUCTIONS
CAUTIoN: work on the 230 V power system must be carried out
by authorised personnel only with due regard to the applicable
installation regulations. Switch off the power supply before
installing the system.
The device is only suitable for Separated Extra Low Voltage
in the range of 12 - 36 V AC/DC!
μ
= Contact gap < 1.2 mm
Use this product only as intended (as described in the user instructions).
Changes or modifications to the product or painting it will result in loss
of warranty. You should check the device for damage immediately
after unpacking it. If there is any damage, you should not install the
device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed,
you should turn the device off immediately and make sure that it cannot
be operated unintentionally.
NoTE: this device must not be disposed of as unsorted household
waste. Used devices must be disposed of correctly. Contact your
local town council for more information.
2 • DESCRIPTION
ESYLUX presence detector with a 180° field of detection and a
range of 16 m. ESYLUX presence detectors are passive infrared
detectors, which react to moving heat sources (e.g. people)
(fig. 1 (1) working area (2) head-on to detector (3) diagonally to detector).
If the presence detector senses a change in thermal radiation
inside its field of detection, depending on the preset light value,
it will switch on the light channel for an adjustable period of time.
The ESYLUX presence detector is designed exclusively for wall
mounting. The ESYLUX presence detector features factory settings
and operates according to preset values. The values can be
individually modified using the ESYLUX Mobil-PDi/MDi or the
Mobil-RCi-M remote control (available as optional accessories).
GB
9