Adventys GL 650 FL Guide D'utilisation page 25

Dettched commtnd
Switch On the device
Connect the BLUE/ BROWN wire on NEUTRAL of the electric socket.
Connect the GREY/BLACK wire on PHASE of the electric socket.
Connect the GREEN and YELLOW wire on GROUND of the electric socket.
Connect your device on the adapted electric socket of a single-phase network 230 V, 50 Hz.
Press the « ON/OFF » touch to switch on the device. The value « 0 » displays on the
indicator of power. Still no power is sent at that point.
Press either the power touches (+) to send power to the pan. The power display indicates
the power set into the pan.
Switch Off the device
Press the « ON/OFF » touch to switch off the product. The power is cut and the display turns off.
After removing the pan from the cooktop, an « H » (stands for « Hot ») might be flashing on the display as long as
the temperature on the vitroceramic glass exceeds 60°C.
Timer setting
For activate the timer press the (timer) touch. The timer light switch on and there is « ti »
message on the display for 3 second.
Press (+) and (-) to adjust the timer. The duration of the timer is between 1 and 99 minutes.
The end of the timer forces the stop of the power. The product is automatically switched
off. To stop the sound emitted at the end of the timer, a brief press on any touches is
enough.
For desactivate the timer press the (timer) touch. The timer light switch off and there is « te »
message on the display for 3 second.
25