Cleaning The Touch Screen - Autel MaxiDAS DS708 Manuel D'utilisation

7. Maintenance, Warranty & Service

7.1. Cleaning the Touch Screen

The touch screen can be cleaned with a soft cloth and alcohol or a mild
window cleaner.
IMPORTANT: Do not use any abrasive cleansers or automotive
chemicals on the touch screen.
7.2. Cleaning and Inspecting the Unit
When using the MaxiDAS
1. Check the housing, wiring, and adaptors for dirt and damage before and
after each use.
2. At the end of each working day, clean the MaxiDAS
wiring, and adapters with a clean damp cloth.
IMPORTANT: Do not use any abrasive cleansers or automotive
chemicals on the MaxiDAS
7.3. Quick Troubleshooting Tips
1. Ensure that the scan tool is connected to a power source and the Power
LED light is illuminated.
2. Ensure that the SD card is inserted into the scan tool.
3. Ensure that the scan tool has been registered.
4. Ensure that the system software and diagnostic application software are
properly updated.
5. Ensure that the scan tool is connected to the Internet.
6. Check all cables, connections and indicators to see if the signal is being
received.
7. Do not use the scan tool beside microwave ovens, cordless phones and
some medical or scientific instruments to prevent signal interference.
8. Ensure that the computer installed with the PCLink software is connected
to a printer.
®
DS708 unit, make sure to do the following:
®
DS708 unit.
87
®
DS708 housing,