Table des Matières
Publicité
Cable network connection. Connect the scan tool to network router with
a RS232 Serial Cable supplied. Please refer to section 5.3 Network for
detailed instructions.
For the computer
Ensure that the Print Server software has been properly installed to your
computer.
detailed instructions.
Ensure that the computer has been properly connected to a printer.
Run the Print Server software on computer.
To print the data, follow these steps:
1. When the live data is printable, a Print function key appears in the right
column of the screen.
NOTE: Now only the data in text is printable. If you want to print some
information which is unprintable, you can use the Screen Capture
function to take a picture of the test screen, then print the picture taken.
2.
Click on the Print function key on the scan tool screen. The data is
uploading to the computer. If there is more than one computer running
the Print Server software in the network, the scan tool will ask you to
select one of them.
3. When uploading finished, a preview document is showing on the
computer screen.
Please refer to Section 2.3 Install the PC Software for
Figure 4.8: Printer selection
64
Publicité
Table des Matières
