Technical Specifications; Intended Use - Maggi JUNIOR 640 Manuel D'utilisation

1-5 TECHNICAL SPECIFICATIONS

DESCRIPTION
Blade diameter (mm)
Hole diameter (mm)
Size of driving shaft (mm)
Three-phase motor power (Kw)
Single-phase motor power (Kw)
Motor revs (r.p.m.)
Intake opening on blade guard (mm)
Intake opening on back hood (mm)
Table size (mm)
Max cutting length (mm)
Max cutting length max (mm)
Max height cutting width (mm)
Max height cutting width (mm)
Max cutting height (mm)
Max cutting height (mm)
Max blade height from plane (mm)
Max blade height from plane (mm)
Max blade cutting height at 45° (mm)
Max blade cutting height at 45° (mm)
Max cut with arm at 45° (right) (mm)
Max cut with arm at 45° (left) (mm)
Net weight (Kg)
Gross weight (Kg)
Size of package (mm)
8
Junior 640 Big 800
Ø 350/400 Ø 350/400
Ø30 Ø 30
Ø25x80 Ø 25x80
3 3
2,2 2,2
2800 2800
Ø60 Ø 60
Ø100 Ø 100
975x1580 1145x1860
[Ø350] 20x550 20x710
[Ø400] 20x545 20x705
[Ø350] 100x480 100x640
[Ø400] 125x450 125x610
[Ø350] 100 100
[Ø400] 125 125
[Ø350] 70 70
45 45
[Ø400]
[Ø350] 60 60
[Ø400] 80 80
20x380>100x330 20x500>100x450
20x190>100x140 20x310>100x260
180 198
220 246
1400x850x590 1400x850x590
1-6
It is recommended for the radial arm saws
machines to be exclusively used for the opera-
tions described in this manual, including nor-
Best 960 Best 1250
mal maintenance operations.
Ø 350/400 Ø 350/400
Ø 30 Ø 30
Ø 25x80 Ø 25x80
The machines are designed in particular for
3 3
perpendicular and 45
2,2 2,2
2800 2800
ence to the abutting square.
Ø 60 Ø 60
Ø 100 Ø 100
1290x2000 1580x2400
20x870 20x1160
20x865 20x1155
100x800 100x1090
125x770 125x1060
100 100
It is therefore advisable to look the instruc-
125 125
tion manual over before assembling the
110 110
machine. Any modification, use or inter-
85 85
60 60
vention other than those provided for rep-
80 80
resents an anomalous condition which,
20x615>100x565 20x800>100x770
besides damaging the machine, can be ex-
20x425>100x375 20x610>100x580
269 285
tremely dangerous for the operator.
331 347
1500x1000x550 1800x1000x630

INTENDED USE

WARNING
°
cutting with refer-
WARNING