Mounting To A Concrete Ceiling - Epson ELPMB25 Guide De L'utilisateur

Procedure
Refer to the ceiling template to cut the bolt-mounting holes into the ceiling.
Turn the side of this
cutout to the screen.
Holes for horizontal rotation adjustment
The direction of the projector can be
adjusted at up to ±5 degrees by rotating it.

Mounting to a Concrete Ceiling

When installing the ceiling mount on a concrete ceiling, use 4 anchor bolts (M12). You need
to purchase commercially available anchor bolts.
Warning
vMake sure in advance that the concrete on which this product is installed can
hold the weight and lateral movement of the projector and ceiling mount. If the
concrete is not strong enough or has deteriorated, fortify it with reinforcing
bars or something similar.
vInstall the anchor bolts according to the specifications and methods of the
manufacturer of the materials so they do not come out, become loose, or shift.
vTighten the screws firmly during installation or after adjusting the angles.
After tightening the screws, retighten them firmly and make sure that they are not
loose.
vEpson accepts no responsibility for the projector and the ceiling mount falling
due to inadequate installation.
22
Ceiling template (units: mm)
The center of
rotation when
adjusting
horizontally
40
80
200.4
160
80
93
14
100
186
251