Installation; Removing The Ceiling Plate From The Projector Plate; Installing The Ceiling Plate To The Ceiling - Epson ELPMB25 Guide De L'utilisateur

Installation

Removing the Ceiling Plate from the Projector Plate

The ceiling plate is fitted to the projector plate at the factory. Use the following procedure to
separate them.
Procedure

Installing the Ceiling Plate to the Ceiling

Determine the distance to the screen and locate the mounting position before mounting the
ceiling plate.
The distance varies according to the type of the lens unit installed on the projector. Refer to
the "User's Guide" supplied with the projector or lens unit.
A
Remove the screws for the vertical tilt
adjustment points on both sides using
the supplied hexagon wrench (M8).
B
Remove the ceiling plate from the
projector plate.
21