Precautions On Where To Mount The Projector - Epson ELPMB25 Guide De L'utilisateur

vInstall the supplied safety wire to prevent the projector from falling.
The safety wire also prevents the projector from swaying during an earthquake or
vibration. sp.28
vApplying a screw-locking adhesive, lubricant, oil or other substance to the points
at which the projector is fixed to the ceiling mount can make the case crack and
the projector fall, leading to damage or injury. Do not use any sort of adhesive,
lubricant, or oil when installing or adjusting the ceiling mount.
vNever loosen any bolts, screws, or nuts after installation. Also check periodically
that no screws have come loose. If you find a loose screw, retighten it firmly.
vDon't use the ceiling mount and refer all repairs to qualified service personnel
under the following conditions:
• The ceiling mount fell off or was broken before or during installation.
• The supplied parts have problems and do not work correctly.
vDo not strongly pull or pinch the projector's power cord during installation.
Contact your dealer if the wires of the power cable become exposed or broken.
At least two people are needed for the installation. Make sure to provide a sturdy
scaffold for this work.
You may fall or drop the projector and cause injury.
Precautions on Where to Mount the
Projector
Carefully read the warnings in "Safety Instructions / Support and Service Guide" supplied
with your projector before starting the installation to determine a suitable place to install it. In
particular, pay attention to the following items.
vSet the projector up in a location where direct sunlight or strong light from fluorescent
lamps does not shine onto the receiver for the remote control. Strong light shining onto the
receiver for the remote control may interfere with remote control operations.
vInstall the projector so it is away from the air outlet of air conditioners or other similar
devices.
vTo limit the effect of external noise, we recommend that you position the projector so that
the cable connecting it to a computer or other devices is no longer than 20 meters.
vThe projector should be installed in a location that is free of dust and moisture to prevent
the lens and internal optical parts from becoming dirty.
vDo not install the projector in a location beyond its operating temperature range. Doing so
can cause it to malfunction.
vClosing the curtains in a bright room makes the projected image easier to see.
20
Warning
Caution