Important Notes - ABB VM/S 1.1 Mode D'emploi

Important notes

Installation and assembly must be performed only by authorized
electricians. The applicable standards, guidelines, regulations
and legal requirements must be observed when planning and
setting up electrical installations.
Risk reduction instructions:
– Protect the video module against moisture, dirt and
– Do not exceed the stated technical data when
– Make sure the video module is adequately cooled
Cleaning: Soiled devices can be cleaned with a dry cloth. If this
is not sufficient, a cloth slightly dampened with a soap solution
may be used. Never use caustic agents or solvents.
Maintenance: The video module is maintenance free.
The device must not be repaired if damaged (e.g. during
transportation or storage).
Opening the video module will void the warranty.
damage during transportation, storage and
operation!
operating the video module!
at all times!
13