General Description; Special Features - ABB VM/S 1.1 Mode D'emploi

General description

The video module is used for connecting a video camera to the
ABB Internet Gateway IN/S x.1. The video module converts a
PAL/NTSC signal into a data stream on the USB. The device can
be connected to the IN/S using the supplied USB cable. This
allows current video images of an installation to be viewed from
any Internet connection.

Special features

Any PAL/NTSC video camera with 1 Vpp and 75 Ohm can be
connected
An Internet connection and the IN/S with connected VM/S are
all that is needed to access the installation from anywhere in
the world
Up to128 images can be stored in the IN/S
10