Jaga AURORA H52-TYPE11 Instructions D'installation page 61

Electrical connection OUTSIDE the casing
06B1
Hang the device on the wall brackets.
06B2
Hydraulically connect the device.
If you would like to close the device on the left
side, see page 63.
Mount the thermostatic knob.
06B4
Plug the power plug into the wall socket.
06B3
Remove the cable from the device along the
bottom.
06B5
The LEDs in the control panel will flash.
|
jaga AURORA Installation instructions 61
EN
= OK
MODE 1 2 3 4 5
ON/OFF = 3 Sec