English - 4MOMS bounceRoo Mode D'emploi

Troubleshooting & Frequently Asked Questions
Problem
The vibration keeps shutting off.
The vibration is weak or is not working.
I can't attach the toy bar.
I can't remove the seat ring from the
base.
20
Solution
The bounceRoo vibration setting is
™
designed to automatically shut off
after 20 minutes. Press the power
button to restart the vibration.
Adjust the vibration to a higher
intensity. If that does not solve the
problem, replace all three batteries.
Do not mix new batteries with old
batteries.
Make sure the toy bar is pointing
to the side (at a 90 degree angle)
when you place it in the hole. Press
down and rotate it to the front. If that
doesn't work, try pointing the toy bar
to the other side before rotating it to
the front.
Press the button on the underside of
the seat ring clips in order to release
the seat. Pull the seat ring back while
holding the base. It may be easier to
release one side at a time.
Troubleshooting & Frequently Asked Questions
Problem
How do I remove the seat fabric?
How long can I use the bounceRoo
™
with my baby?
Care
For your child's continued safety, periodically inspect the product to
make sure that all connections (screws, buttons, zippers, clips) are
securely fastened, that they do not show signs of wear or abuse, and
that they are not damaged or broken.
The bounceRoo vibration function is designed to shut off after 20
™
minutes of uninterrupted use. If you would like to continue using the
vibration function, press the power button to resume.

ENGLISH

Solution
In order to remove the seat fabric you
must first remove the seat ring from the
base. Once the seat ring is removed,
unbuckle the clip underneath the
vibration module, unzip the fabric
along both sides of the seat ring and
slide the fabric off of the seat ring.
Discontinue use of the bounceRoo
™
when either of the following conditions
apply: child can sit up unaided or
attempts to climb out. Maximum
weight is 25lb (11.3kg). Maximum age
is 6 months.
21