Lighting Instructions - Landmann 42135 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Prior to the first use, it is important to clean your grill
with heat. This will clean the internal parts by burning
off any residue and odor from the manufacturing
process. To perform this cleaning, operate the grill for
approximately 30 minutes at the highest heat setting
with the lid closed.
IMPORTANT
Please read these instructions before attempting to
light the grill.
Failure to open the lid before igniting
may result in an explosive flare-up,
which can cause serious bodily
injury or death.
DO NOT lean over the open grill
when lighting.
1. Turn all gas control knobs to the
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. To ignite a burner, push and turn any control knob
to the
HIGH position.
5. Press and hold the
electronic igniter button to
light the selected burner.
6. If the burner does NOT ignite in five seconds, turn
the burner control knob to the
wait at least five minutes for the gas to clear and
repeat this lighting procedure.
Failure to follow the five-minute
waiting period may result in an
explosive flare-up, which can cause
serious bodily injury or death.
7. To extinguish the burner, push in the control
knob(s) and turn clockwise to the
Side Burner Lighting
1. Turn
OFF gas burner control valves.
2. Turn on gas source or tank.
3. Open lid during lighting.
4. Push and hold down the control knob and turn
SLOWLY (2 to 3 seconds) to
hear the igniter click.
5. If ignition does not occur in 5 seconds, turn the
burner control
OFF, wait 5 minutes and repeat
the lighting procedure.

Lighting Instructions

OFF position.
OFF position,
Match Lighting
Note: Match lighting tool (W) is located on the inside
of the door (K).
1. Turn all gas control knobs to the
OFF position.
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. Remove the match lighting tool and stick a match
5. Light the match.
6. Once lit, guide the lit match under the grate.
7. Push in and turn the control knob to
IGNITE. You should
8. Adjust burner control knob to the desired cooking
18
into the end of the tool.
burner closest to the light match. The burner should
light immediately.
temperature.
OFF position.
HIGH for the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

42211

Table des Matières