Tools Needed; Product Specifications; Dimensions - LG WT7850H A Série Manuel Du Propriétaire

8 INSTALLATION
INSTALLATION

Tools Needed

Pliers
a
Flat-blade Screwdriver
b
Level
c

Product Specifications

The appearance and specifications listed in this manual may vary due to constant product improvements.
Model
Electrical requirements
Min. / Max. water pressure 20 - 120 psi (138 - 827 kPa)

Dimensions

Net weight
Max spin speed
WARNING
• Moving or installation of the appliance requires two or more people. Failure to follow these
instructions may result in injury.
• Store and install the appliance where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to follow this warning can cause product or part
failure, serious injury, fire, electric shock, or death.
• Properly ground the washer to conform with all governing codes and ordinances. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
• To reduce the risk of electric shock, do not install the appliance in humid spaces. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
• To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting
or other materials.
• Do not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded
3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
• Certain internal parts are intentionally not grounded and may present a risk of electric shock
only during servicing. Service personnel-do not contact the following parts while the appliance is
energized. : pump, motor, noise filter cover, and heater (on applicable models).
WT7850H*A
120 VAC @ 60 Hz
27" (W) X 28 3/8" (D) X 44 1/4" (H), 57 1/4" (H with lid (door) open)
68.6 cm (W) X 72.1 cm (D) X 113 cm (H), 145.3 cm (H with lid (door) open)
138.9 lb (63 kg)
950 RPM (±50 rpm)