Control Panel Features - LG WT7850H A Série Manuel Du Propriétaire

Masquer les pouces Voir aussi pour WT7850H A Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Control Panel

Control Panel Features

Power On/Off Button
a
• Press to turn the washer on. Press again
to turn the washer off. Pressing the Power
button during a cycle will cancel that cycle
and any load settings will be lost. The lid
(door) will unlock after a brief pause.
NOTE
• If there is any water remaining in the tub after
the washer shuts off, it will drain following 4
minutes delay. The washer can be restarted any
time before the drain begins. However, once
the water begins to drain, all functions will be
suspended until the water has been completely
drained and the washer shuts off.
Cycle Selector Knob
b
• Turn this knob to select the desired cycle.
Once the desired cycle has been selected,
the standard presets will appear in the
display. These settings can be adjusted using
the cycle modifier buttons anytime before
starting the cycle.
NOTE
• To protect your clothing, not all settings are
available on all cycle selections.
2
1
3
3
Start/Pause Button
c
• Press this button to start the selected cycle.
If the washer is running, use this button to
pause the cycle without losing the current
settings.
NOTE
• If Start/Pause is not pressed within 60 minutes
of selecting a cycle, the washer automatically
turns off and all cycle settings are lost. Any
water remaining in the tub will be drained.
Cycle Modifier Buttons
d
• Use these buttons to adjust the water
temperature, spin speed and soil level
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to select other settings.
Special Cycle and Option Buttons
e
• Press these buttons to select special cycles
or additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for three
seconds.
Time and Status Display
f
• The display shows the settings, estimated
time remaining, options, and status
messages for your washer. When the washer
is turned on, the default settings in the
display will illuminate.
OPERATION
21
6
4
5

Publicité

Table des Matières
loading

Table des Matières