VOX Amplification Night Train 15H G2 Manuel D'utilisation page 5

5. 8 OHM Speaker Jack – Use this to connect the Night Train to one 8 ohm Cabinet or two 16 ohm Cabinets.
(Night Train 15C1 NOTE: If using a 16ohm extension cabinet, both the internal speaker and the external
cabinet must be connected to the 8 ohm jacks)
WARNING !
WARNING !
WARNING !
WARNING !
WARNING !
6. MAINS INPUT – Connect your electricity here with the supplied, detachable Mains (power) cord.
Night Train 15H G2
Power Output:
Dimensions (W x H x D):
Weight:
Included items:
Options:
Night Train 15C1
Power Output:
Speaker:
Dimensions (W x H x D):
Weight:
Included items:
Options:
Specifications and appearance are subject to change without notice for improvement.
Always use a non-screened VOX approved speaker lead with the Night Train amplifier
and cabinet.
Please ensure that your amplifier is connected to the correct mains power voltage—
please check the rear panel rating plate. If in doubt consult dealer.
NEVER operate this amplifier without the loudspeaker load being connected. Serious
damage can occur otherwise.
This amplifier must always be earthed (grounded) to prevent the risk of electrical shock.
Do not connect speaker cabinets to both 8ohm and 16ohm jacks at the same time.
SPECIFICATIONS
15 Watts RMS into 8 or 16 ohm
370 x 155 x 180 mm (14.57 x 6.10 x 7.09 inches)
7.3Kg (16.09 lbs)
Power cable, Owner's manual, Speaker cable
VFS2A Footswitch
15 Watts RMS into 8 or 16 ohm
Celestion 16 ohm G12M Greenback
495 x 260 x 410 mm (19.49 x 10.24 x 16.14 inches)
17.5Kg (38.58 lbs)
Power cable, Owner's manual
VFS2A Footswitch
The badge ensures over 50 years of VOX Tube Amplifier Design Expertise.
5
www.voxamps.com