Foreseeable Misuse; Technical Data - Hilti TE 2000-AVR Mode D'emploi Original

3.3 Intended use
The product described is a hand-held electric breaker. It is designed for chiseling work on concrete, masonry
and asphalt. It can also be used for excavating and compacting.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
3.4

Foreseeable misuse

• The power tool may be used only in a dry environment.
• Do not use the power tool where there is a risk of fire and explosion.
• Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.6 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator flashes red.
3.7 Items supplied
Electric breaker, operating instructions, grease. The transport trolley is available as an accessory.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group
4

Technical data

4.1 Breaker
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with EPTA procedure 01
Impact speed
Protection class
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
*2167142*
Printed: 20.05.2019 | Doc-Nr: PUB / 5333032 / 000 / 04
Meaning
End of service interval – servicing is due. Return
the product to Hilti Service for servicing in good
time in order to ensure that it is always ready for
use.
A fault has occurred in the power tool.
Protection against overheating
The voltage provided by the electric supply is too
high.
2167142
14.5 kg
30 Hz
II
English 5