gala gar GALA MIG 255 M Manuel Technique D'instructions page 20

GALA MIG 255 M
R
S
F C
J
A
A
Torch connection.
B
Wire speed control.
C
SPOT TIME. Spot time.
M
Welding earth connection.
H- GROUNDING AND REACTANCE TAPPING.
Depending on the job to be carried out we will connect the earth to one of the taps. Normally we will use a
high tapping when the part thickness requires this (See Fig. 7). However, the user himself must determine the
correct tap for each type of job.
GALA MIG 255 M. Technical Instructions Manual
Control pannels of GALA MIG (V. Compacta) equipment.
H
I
B
K
G
Grounding or reactance tapping.
L3: MAX
B - Wire speed control potentiometer.
C- SPOT TIME: Welding time control potentiometer.
D - Welding voltage selector switch.
E
Commutator of weld scales.
E-
G- Luminous ON/OFF switch.
J- Indicating activation ventilator (The fan only
operates when the machine is hot).
K- Fuse-holder. (1A/250V fuse)
R/S- Digital voltmeter-Ammeter. Measures the voltage
D
and intensity of the welding circuit. (*)
T 1A/250V
E
F
H
I
J
L2: HALF
Protection fuse.
Thermal overload warning light.
SOFT-START: Soft control on
initial arc striking.
BURN-BACK: Final wire length
control.
Indicating activation ventilator.
FAN
L1: MIN
20