Optelec Traveller HD Manuel D'utilisation page 20

Masquer les pouces Voir aussi pour Traveller HD:
Table des Matières

Publicité

Optelec
- Select the time before the unit will enter Standby mode by using the
Menu button to increase and the Reading Line button to decrease the
time. Press the Mode button to confirm your choice. Selecting NEVER
will disable the Standby function.
- Press the Snapshot button to go back to the previous menu.
Submenu Power off
Sets the time before the Traveller HD is automatically switched
off. By default, the power off time is set to 5 minutes. These 5
minutes are activated after the default standby time of 15
minutes. By default, the unit is therefore automatically switched
off after 20 minutes.
To adjust the Traveller HD power off time:
- Activate the menu by pressing the Menu button for 2 seconds.
- Use the Menu button to move up and the Reading Line button to move
down within the menu. Select the menu option Power and activate this
menu by pressing the Mode button.
- Select the Power off option by using the Menu and Reading Line buttons
to scroll through the options. Press the Mode button to confirm your
choice.
- Select the time before the unit will power off by using the Menu button
to increase and the Reading Line button to decrease the time. Press the
Mode button to confirm your choice. Selecting NEVER will disable the
automatic power off function.
- Press the Snapshot button to go back to the previous menu.
Submenu Open
To enable or disable the power-on function upon opening the
Traveller HD:
- Activate the menu by pressing the Menu button for 2
seconds.
- Use the Menu button to move up and the Reading Line
button to move down within the menu. Select the menu option Power and
activate this menu by pressing the Mode button.
- Select the Open option by using the Menu and Reading Line buttons to
scroll through the options. Press the Mode button to confirm your choice.
- To enable the power-on function upon opening the unit, select the value
POWER ON by using the Menu or Reading Line button. Press the Mode
button to confirm your choice. Selecting NOTHING will disable the
power-on function upon opening the unit.
- Press the Snapshot button to go back to the previous menu.
20
Traveller HD
English

Publicité

Table des Matières
loading

Table des Matières