Introduction - Dimas WS 462 Mode D'emploi

Introduction

WS 400 is a series of completely new complete wall saws
from Dimas. The intention when developing the DIMAS
WS 400 series has been to produce a very light yet
powerful wall saw that is easy for one person to handle
using modern production methods and high performance
materials.
Among the new features on the WS 400 series is the
possibility to secure the blade radially on the saw. As the
saw unit is mounted on a carriage using a quick-action
mounting instead of directly on the rail, assembly of the
saw is significantly easier.
To utilises the input effect in the best possible way the
saw is mounted on Dimas' the latest rail. This is a very
stable rail, which allows the saw to be controlled more
precisely, which in turn results in more efficient cutting. As
the equipment's component parts work with small losses
and as the blade is moved in 50 mm closer to the rail
compared to earlier models. This significantly reduces the
stresses on the saw, which has also resulted in a saw with
an extremely compact design and at the same time
efficiency has been increased.
6 - English
Complete saw equipment consists of
One saw
One Rail 1.2 m
One Rail 2 m
Four standard wall mountings
One rail holder
One connector
One blade guard 800 or one blade guard 1000
One blade guard guide
One tool kit
One bottle of Dimas oil 150
Transport cases for the different units The saw carriage is
mounted on both the long and short rails at the factory to
make cutting as easy as possible.
As a large part of the sawing work consists transporting,
the saw equipment is supplied in specially produced
cases. The cases provide good protection during transport
and reduced the number of packages that need to be
moved between the workplaces, which makes the work
more effective.
Operator's Manual WS 462