Dimas WS 462 Mode D'emploi page 7

Operator's Manual WS 462
• Personal protective equipment according to the
Operator's Manual must always be used and you
should use protective clothing too. Never wear loose
fitting clothes that can catch in moving parts.
• People that need to be in close proximity of the
machine must wear hearing protection as the sound
level when cutting exceeds 85 dB(A).
• Only use blades recommended by Dimas.
• Never saw without coolant. A poorly cooled blade can
cause segments to come loose from the blade. The
water coolant also binds concrete dust.
• Never use a damaged or worn blade.
• Do not use the machine if it is not working properly.
• Regulations for the prevention of accidents, and other
general safety and occupational health regulations,
must always be followed.
• Store the machine in a locked space away from
children and adults untrained in use of the machine.
• Firmly secure or anchor concrete blocks that have
been cut loose. The heavy weight of cut material can
cause extensive damage if it is not moved under
controlled conditions.
• Always check the back of the wall where the blade
comes out when cutting through. Secure, cordon off
and make sure that no people can be injured or
materials damaged.
• Make sure that other people are nearby when you are
using the machine so that you can call for help should
an emergency arise.
WARNING!
Always use approved protective clothing
and approved protective equipment when
using the machine. Protective clothing and
protective equipment cannot eliminate
accident risks, but by using the right
clothes and equipment you can reduce the
seriousness if an accident should occur.
Ask your dealer about approved and
recommended protective clothing and
protective equipment.
English - 5