JVC KD-R771BTM Manuel D'instructions page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIO SETTINGS
SUB.W LEVEL *
1
SPK-OUT *
2
(Not applicable when 3-way crossover is selected.)
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. (  25)
PRE-OUT *
3
–50 to +10 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (SW or
REAR/SW) through an external amplifier. (  25)
SUB.W *
3
ON / OFF: Turns on or off the subwoofer output.
FADER
(Not applicable when 3-way crossover is selected.)
R15 — F15 (00): Adjusts the front and rear speaker output balance.
BALANCE *
4
L15 — R15 (00): Adjusts the left and right speaker output balance.
VOL ADJUST
–15 — +06 (00): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust.
AMP GAIN
LOW POWER: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 35.
SPK/PRE OUT
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (  16, Speaker output settings)
SPK SIZE
Depending on the crossover type you have selected (see [X ' OVER TYPE]
below), 2-way crossover or 3-way crossover setting items will be shown.
(  16, Crossover settings)
X ' OVER
By default, 2-way crossover type is selected.
X ' OVER TYPE
Caution: Adjust the volume before changing the X ' OVER TYPE to
avoid the sudden increase or decrease of the output level.
X ' OVER 2-WAY (Displayed only when [X ' OVER 3-WAY] is selected)
YES: Selects two way crossover type. ; NO: Cancels.
X ' OVER 3-WAY (Displayed only when [X ' OVER 2-WAY] is selected)
YES: Selects three way crossover type. ; NO: Cancels.
SND EFFECT
ENHANCE
(Not applicable for TUNER source.)
SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels.
RESPONSE
LV1/ LV2/ LV3: Virtually makes the sound more realistic. ; OFF: Cancels.
LV1/ LV2/ LV3: Virtually adjust the sound position heard from the
SOUND LIFT
speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noice heard from outside the car
VOL LINK EQ
or running noise of the tyres. ; OFF: Cancels.
(Not applicable for TUNER source and AUX source.)
K2
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
*
1
Displayed only when [SUB.W] is set to [ON].
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
(  16)
*
3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W]. (  16)
*
4
This adjustment will not affect the subwoofer output.
15
ENGLISH

Publicité

Table des Matières
loading

Table des Matières