Peak Hold/Maximum Load Function - Adam Equipment Solis SAB Série Mode D'emploi

5. Press the ON/OFF button once to carry out another measurement, or twice to exit from the
function.
11.7

PEAK HOLD/MAXIMUM LOAD FUNCTION

The "maximum load" function allows you to measure the peak load of a solid.
1. Select the maximum load function as described in paragraph 10.
A tare will automatically be carried out and the following screen will be shown on the display
with an indication of the maximum load function at the top left:
2. The peak load weight can now be detected.
3. Press the TARE button to carry out another measurement.
4. Press the ON/OFF button to exit from the peak hold/ maximum load function.
©Adam Equipment Co. Ltd. 2018
57