Adam Equipment Solis SAB Série Mode D'emploi page 43

2. Then press the PRINT button to confirm the selection.
3. The density value of the liquid to be used will be displayed. The default value is equal to
1.0000 (distilled water at 20°C).
4. It is possible to insert a different value using the CAL and MENU buttons to increase and
decrease the value, while pressing the O/T button to pass to the next value. During the
menu input stage, prolonged pressure on the O/T button allows you to cancel the inserted
value.
5. Once the desired value has been set, press the PRINT button.
6. It will now ask you to weigh the solid in the air.
©Adam Equipment Co. Ltd. 2018
41