Default Setting; Recover Factory Settings - Lupine Betty R Manuel D'utilisation

Default setting:

Recover factory settings:

1.
Press and hold the button until 5
release the button

2.
Disconnect the battery, and all factory settings will be restored.
3.
Reconnect the transmitter with the lamphead see page 39.
SOS:
SOS will continue until the battery is empty.
signal is punishable by law.
RVLR:
This mode includes an additional slow flash mode.
Alpine SOS:
Alpine SOS will continue until the battery is empty.
signal is punishable by law.
Flash 15hz: (Disorientation)
This mode is extremely irritating and may by no means be misused.
Center:
Low beam made by the center LED only.
1. brightness level
2. brightness level
3. brightness level
red LEDs
Improper use of the SOS
Improper use of the SOS
22 W
45 W
2 W
turn on.
4
Betty R 41