Mounting Accessoires - Lupine Betty R Manuel D'utilisation

2

Mounting Accessoires

Handlebar mounting:
For mounting the Betty R on a handlebar, two
optional CNC Quick Release mounts are available.
Have a look at www.lupine.de
Art.No. 825 for Ø 25.4 mm
Art.No. 831 for Ø 31.8 mm
Art.No. 834 for Ø 31.8 mm
1
Put the clamp around the
handle bar and close.
30 Betty R
For mounting, please first loosen the bolts on
the helmet mount/headband. Please now use
the o-ring and bolts which came with your quick-
release mount. Put the bolt through the hole of
the handlebar mount, then put the second o-ring
onto the tip of the bolt.
handlebar mount, o-ring, bolt must be strictly
adhered to as shown in the picture in order to
ensure flawless functionality.
the bolt slightly first, then securely with 2 Nm.
Cover the open thread with the included plug.
2
The order of lamp, o-ring,
After that, tighten