Operation - Lupine Betty R Manuel D'utilisation

Capacity Indicator:
Audible:
To check the capacity, simply press the
touch-pad once. At first an audible sig-
nal will sound, which is especially useful
while using the battery mounted on
a helmet or headband, to give a quick
reading in 20% steps.
Visible:
The visible indicator uses 5 red LEDs. The LEDs can operate in two different
operating states: blinking and continuous. LED meanings:
is indicating a 10% step and a continuously glowing LED a 20% step.
Example: 3 LEDs steady glow
1 LED blinking
Taillight
To run the taillight simply
operate continuously. To switch off the taillight, simply press the pad again.
Moving light:
Press the touch pad three times
press the button another time.
Note: The capacity indicator will fade out within a few seconds. If it does not,
eventually the taillight was activated and the 5 glowing LEDs do by far not
mean the battery is fully charged.
5 x
4 x
3 x
2 x
1 x
(20 %, 40 %, 60 %)
= 70 % remaining capacity
(80 %)
press the touch pad two times
to activate the moving light. To switch it off

Operation

= 100 %
= 80%
= 60%
= 40%
= 20%
A blinking LED
and the 5 LEDs will
3
Betty R 33