System; Product Info; Reset; Change Pin Code - Samsung DTB-B460F Consignes D'utilisation

OPERATING THE RECEIVER

4. System

This menu consists of 5 sub-menus : Product Info, Reset,
Change PIN code, Language, and Software Update.
● Place the cursor on this sub menu and press OK key.

4.1 Product Info

If you have to contact your service provider or a service
center they might ask for information available from this
menu.
Place the cursor on this sub menu and press the OK key.

4.2 Reset

This is to restore the factory set values in case the user has
encountered some problems after changing any new
values of channel data and others, which may be in error.
Select Reset menu in System menu and press OK key.
If you want to continue, select "YES" in the warning
window. The receiver will be reset to settings automatically.
Please note that the Factory Default procedure may take a
few seconds.
GB-24
D i g i t a l T e r r e s t
OPERATING THE RECEIVER

4.3 Change PIN Code

In this option, you need to enter the current PIN code at
the first cursor, and at the second cursor enter the desired
PIN code. To confirm, you need to enter the new PIN
code again.
Please remember the PIN code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN Code : 0000

4.4 Language

The "Language" option allows the user to select the
desired language of the OSD.
●
To accommodate user from different regions speaking
different languages, OSD languages are available
6 languages. (English, Français, Deutsch, Español,
Italiano, and Nederlands provided currently)
● To select the desired language menu, press the
keys to change language and press the OK key.
●
The OSD language will vary according to the selected
language.
r i a l R e c e i v e r
/
GB-25