Channel; Auto Scan; Manual Scan; Channel List - Samsung DTB-B460F Consignes D'utilisation

OPERATING THE RECEIVER

2. Channel

This menu consists of 5 sub-menus:
Auto Scan, Manual Scan, Channel List, Favorite Channel
and Parental Guide.
● Select "Channel" in the main menu by using
●
Place the cursor on this sub menu and press the
OK key.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.

2.1 Auto Scan

This function allows you to download of the channels
automatically from the preprogrammed load.
●
Press the OK key.
Auto Scan will be started.
All the channels in the list will be automatically
downloaded.
GB-18
/ keys.
D i g i t a l T e

2.2 Manual Scan

To tune-in new channels and weak signals, the STB has
been provided with the option "Manual Scan" where the
channel data can be entered by the user.
● Select the Channel Number.
You can select the specified channel you want to find.
The followings are defined as a default, but optionally you
can choose it.
Signal Status bar shows you if it is valid.
●
Input the frequency of the channel you want to find.
● Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
● Press the OK key start scanning.

2.3 Channel List

This function is used to delete the channels.
●
Select the channel you want to delete by using
/ keys.
●
Press the RED key.
The message "Do you want to delete the selected
channel?" will appear.
If you delete the channel, select Yes.
● To move to TV or Radio channel, press the TV/RADIO
key repeatedly.
N N o o t t e e : 1. If you want to watch the channel on channel list,
select the channel then press the OK key.
2. Quick way to access the channel list menu : Just press the OK key while you are
viewing a program.
r r e s t r i a l R e c e i
OPERATING THE RECEIVER
GB-19
v e r