Inserting The Li-Ion Battery; Charging The Li-Ion Battery - SilverCrest SFA 40 A1 Mode D'emploi

Inserting the Li-ion battery

♦ Open the battery compartment
compartment cover and pushing it in the direction of the em-
bossed arrow .
♦ Insert the Li-ion battery
sure that the three contacts of the battery lie in the same corner
as the three pins in the battery compartment
of the rechargeable batteries should be facing upwards . The
structure of the battery will not allow it to be inserted any other
way .
♦ After inserting the battery, close the battery compartment
with the battery compartment cover .

Charging the Li-ion battery

Before first use, the Li-ion battery must be fully charged .
♦ Connect the micro USB plug of the supplied car charger adapter
to the micro USB charger connection
set .
♦ Plug the car charger adapter into a suitable socket in your ve-
hicle . The operating LED
Once charging is completed (around 3 hours), the operating
LED goes out .
♦ Unplug the car charger adapter from the vehicle socket and the
hands-free set .
NOTE
► If the operating LED
the charge level of the battery is low and needs charging .
SFA 40 A1
by pressing on the battery
into the battery compartment
lights up orange during charging .
starts flashing orange every 6 seconds,
. En-
. The type plate
of the hands-free
GB │ IE │ 11 ■