Pairing The Hands-Free Set With A Compatible Mobile Phone - SilverCrest SFA 40 A1 Mode D'emploi

Pairing the hands-free set with a compatible
mobile phone
Before you can use the hands-free set, you must pair it with a com-
patible mobile telephone .
♦ With the hands-free set switched off, press the multifunction but-
ton
of beeps and the operating LED flashes alternately blue and
orange . The hands-free set is now in pairing mode for about 2
minutes .
If the pairing does not happen within this time, you will here two
low beeps and the hands-free set switches off .
Set the mobile telephone so that it scans for Bluetooth
♦
vices . A detailed description of how to do this is to be found in
the operating instructions for your mobile telephone .
Select the entry SFA 40 A1 from the list of found devices in
♦
your mobile phone to pair the two devices . The name of the
hands-free set SFA 40 A1 now appears on the list of paired
devices on your mobile phone .
NOTE
► If you are asked to enter a PIN during pairing, enter 0000 .
► If the pairing is successful, you will hear a short beep .
♦ The hands-free set is now in standby mode and the operating
LED flashes blue every 10 seconds . If the connection to the
mobile phone is lost, the operating LED
every 10 seconds .
SFA 40 A1
for about 6 seconds until you hear a rising series
®
de-
flashes briefly blue
GB │ IE │ 13 ■