Controls (See Fold-Out Page); Installing The Hands-Free Appliance In A Vehicle - SilverCrest SBTF 10 C2 Mode D'emploi

Controls (see fold-out page)

Vehicle connector plug
Microphone
+/- Buttons (Raise/lower the sound level)
USB port
Loudspeakers
Multi-function button
LED status indicator
Installing the hands-free appliance
in a vehicle
So that the hands-free appliance can function correctly, it
is connected to the vehicle cigar lighter socket or on-board
power socket and provided with electricity from there.
Ensure that the hands-free appliance engages completely
and that the operation of the vehicle is not negatively
influenced. The hands-free set must be easily accessible
and the speaking distance kept to a minimum. The LED
status indicator
short high signal tone sounds once. The appliance is in
standby mode.
Note:
It is possible that the cigar lighter only functions when the
vehicle ignition is switched on. In cases of doubt, consult
the operating instructions for the particular vehicle.
Caution!
For vehicles in which the cigar lighter, resp. the vehicle cir-
cuit plug, also functions when the ignition is switched off:
Use the hands-free appliance only when the motor is
running. Otherwise, the vehicle batteries could become
discharged over an extended period of time.
Note:
When you are not using the hands-free equipment remove
it from the vehicles cigarette lighter socket. Store it in a dry,
dust free location protected from direct sunlight.
SBTF 10 C2
blinks twice every 3 seconds and a
GB
IE
7