Using The Hands-Free Appliance; Call Function - SilverCrest SBTF 10 C2 Mode D'emploi

When connecting to a previously coupled mobile telephone
it is not necessary to enter a pass-code. You can set your
mobile telephone so that when the hands-free equipment
is switched on a connection with the mobile telephone is
automatically established. As soon as the hands-free set
has connected to the mobile phone that it is paired with,
you will hear two high beeps to confirm the connection.
Further information regarding automatic coupling can be
found in your mobile telephone's operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profile (HFP).
Note:
The sound quality of the hands-free set is heavily depend-
ent on where it is installed. Where possible, set up your
hands-free set so that the microphone
your direction.

Call function

Use your mobile telephone in the usual way to make a call.
For redialing of the last number called, shortly press
the multi-function button
For activation of voice dialling, shortly press the multi-
function button
Note:
Voice dialing is only available with mobile telephones that
support this function. Further information regarding voice
dialing is to be found in the operating instructions for your
mobile telephone.
SBTF 10 C2
twice.
once.
is pointing in
GB
IE
11