Cleaning; Troubleshooting - TechniSat DIGITRADIO UP 1 Mode D'emploi

12 Cleaning

To prevent the risk of an electric shock, you may not clean the device using a
wet cloth or under running water.
You may not use scouring pads, scouring powder and solvents such as alcohol
or petrol.
Do not use any of the following substances: saltwater, insecticide, chlorine-
based or acidic solvents (ammonium chloride).
Clean the housing with a soft, dry cloth. Do not use spirit, thinners, etc.; you
could damage the surface of the device.
Clean the display using a soft, cotton cloth. If required, use a cotton cloth with
small amounts of non-alkaline, diluted, water or alcohol-based soap solution.
Gently clean the surface using the cotton cloth.

13 Troubleshooting

Symptom
The device cannot be switched on.
No sound can be heard.
Poor DAB/FM reception.
The device cannot be connected/paired
via Bluetooth.
Dropouts in the Bluetooth connection.
26
Possible cause/remedy
Ensure that the device has been
connected properly.
Increase the volume. Switch
on the playback device or
increase the volume. Possibly the
incorrect source has
been selected.
Check the antenna position and change
if possible.
Ensure that the maximum range of the
Bluetooth connection does not exceed
10 metres.
Reduce the range between both
devices. The optimum range is between
0 and 5 metres.