Audio Settings; Saving Fm Stations To A Memory Slot; Retrieving Fm Stations From A Memory Slot; Overwriting/Deleting A Station Memory Slot - TechniSat DIGITRADIO UP 1 Mode D'emploi

8.6 Audio settings

> Keep the Info/Menu button depressed and use the << or >> buttons to select
the [Audio Setting] item.
> Press the Enter button.
> Using the << or >> buttons, select the item [Stereo possible] or [Mono only].
> Press the Enter button to confirm.
Given that the DIGITRADIO UP1 is a mono device, this setting only affects the
station reception intensity.

8.7 Saving FM stations to a memory slot

The station memory can save up to 10 stations in the FM range.
> First set the desired station frequency.
> In order to store this station on a memory slot, keep the Preset button
depressed while playing. Then use the <<, >> buttons to select a station
memory slot (1-10). Press the Enter button to save.
> Repeat this process to save other stations.

8.8 Retrieving FM stations from a memory slot

> In order to retrieve a station that you have previously stored in the FAV
memory, briefly press the Preset button and use the <<, >> buttons to select a
station memory slot (1-10). Press the Enter button to play the station.
If you have no station saved to the selected station slot [(empty)] appears on
the display.

8.9 Overwriting/deleting a station memory slot

> Simply save a new station to the respective memory slot as described.
When retrieving the factory settings all memory slots are deleted.

9 Bluetooth

> Briefly press the
If Bluetooth mode is being launched for the first time, a playback device, e.g. a
smartphone or tablet, must be paired with the DIGITRADIO UP1.
If a playback device has already been paired once and it is located in the
reception range, it will be automatically connected.
/Mode button until [Bluetooth] is shown on the display.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
19