Troubleshooting - JVC KD-X470BHS Manuel D'instructions

References
Source name Display information: Main
SPOTIFY BT Context title
Song title
to the beginning
BT AUDIO Song title/Artist
Effect* Album title/Artist
beginning
AUX Source name
Date back to the beginning
* During Music Synchronization Effect, the brightness level of the buttons changes and
synchronizes with the music level.
40
ENGLISH
Context title with Music Synchronization Effect*
Artist Album title Playing Time Date
Song title/Artist with Music Synchronization
Playing time Date
Source name with Music Synchronization Effect*

Troubleshooting

Symptom
Sound cannot be heard.
back
"MISWIRING CHECK
WIRING THEN PWR ON"
back to the appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
The unit does not work
at all.
Correct characters are not
displayed.
• Radio reception is poor.
• Static noise while
listening to the radio.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears
and track skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Connect the antenna firmly.
The playback order is determined by the file name (USB).
This depends on the recording process earlier (USB).
Check whether the track is a playable format.
(Page 37)
• Reattach the device (USB/iPod/iPhone).