Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IV. TORQUE SPECIFICATIONS
1/4 (M6)
8 lb. ft. (10.8 N-m)
5/16 (M8)
17 lb. ft. (12.5 N-m)
3/8 (M10)
30 lb. ft. (40.7 N-m)
7/16 (M12)
50 lb. ft. (67.8 N-m)
1/2 (M14)
75 lb. ft. (101.7 N-m)
V. INSTALLATION
1.
Remove factory bolts shown in Figure 1, using torx
drive.
Note:
Factory bolts removed in this step will be
reused.
2.
Assemble rock sliders reusing factory bolts that were
removed in step one. See Figures 2 and 3.
Note:
Do not tighten bolts at this time.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 3
Remove
Figure 1
Figure 2
Figure 3
76599A0
Publicité
Table des Matières
