III. TOOLS REQUIRED
- 1/2" Wrench
- 1/2" Socket
- 10 MM Wrench
- 10 MM Socket
IV. TORQUE SPECIFICATIONS
M8, 5/16
17 lb. ft. (12.5 N-m)
V. MOUNTING KIT INSTALLATION
1. Figure 1 shows the UTV prior to installation
of mounting kit.
2. Remove the front bumper cover.
3. Place the winch inside the frame of the UTV
as shown in figure 2. The winch must be
placed inside the frame prior to the mounting
plate being attached to the bumper assembly.
WARN INDUSTRIES
©2005 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 1, Remove front bumper cover
Figure 2, Place winch into position
PAGE 3
84156A0