Software - KNF SC 920 G Mode D'emploi

Vacuum Pump System SC 920G
Translation of original Operating Instructions, English, KNF 334631-334633 07/21
Press the button to select data point tables (arrow in Fig. 13)

and select the required data point table.
You can now see the data point table that is stored under the
number.
Up to 10 different data point tables can be stored and called as
required. The number in the display (arrow in Fig. 13) indicates
the data point table that is currently selected.

8.2. Software

Please see our website (www.knf.com) for the software and
the information on operating the vacuum pump system via
software.
Operating vacuum pump system
DE
EN
FR
ES
IT
29