Abus Eytron JPEG2000 Dual Codec Mode D'emploi page 54

(o) MENU
(p) J.SHUT
Description of control keys and LEDs
(1) - In playback mode: Press to switch playback from forwards to reverse.
- In programming mode: Press to move the cursor to the left.
(2) - In playback mode: Press to increase playback speed.
- In programming mode: Press to move the cursor up.
(3) - In search mode: Start playback.
- In programming mode: Press to confirm your selection.
- In playback mode: Press to switch playback from reverse to forwards.
- In programming mode: Press to move the cursor to the right.
(5) - In playback mode: Press to increase playback speed.
- In programming mode: Press to move the cursor down
(6) - REC: The LED lights up red during recording.
(7) - FULL: The LED lights up red if the hard disk is full.
(8) - RUN: The LED lights up red when jog-shuttle is used.
(9) - PLAY: The LED lights up green during playback.
(10) - NET: The LED lights up yellow if a LAN connection is active.
(11) - ACTIVE: The LED lights up yellow if an option is activated
(PTZ control, search function, rotating wheel ...).
(12) - CD-R Writer
(13) - USB Port for firmware upgrade.
(14) - USB Port USB backup
(15) - Hard disk housing
- Press to open the OSD menu
- Press to activate the jog-shuttle.
54