Milwaukee 0615-20 Manuel De L'utilisateur page 3

SPECIFIC SAFETY RULES
1. Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.
2. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to fi lter out microscopic particles.
3. Use auxiliary handles supplied with the tool. Loss of control can cause personal
injury.
4. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
5. Hold tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
6. Keep hands away from all cutting edges and moving parts.
Symbology
Volts Direct Current
No Load Revolutions
per Minute (RPM)
Underwriters Laboratories, Inc.,
United States and Canada
Specifi cations
Cat. No. Volts DC No Load RPM
0615-20 14.4
0617-20 14.4
0625-20 18
0627-20 18
No Load Blows
per Minute
Low 0-500 N/A
High 0-1700
Low 0-500 Low 0-7500
High 0-1700 High 0-25500
Low 0-500 N/A
High 0-1700
Low 0-500 Low 0-7500
High 0-25500
High 0-1700
4
FUNCTIONAL DESCRIPTION
6
5
1. Tool holder
2. Trigger
4
3. Control switch
4. Hammer/drill selector collar
(Hammer-Drill models only)
5. Keyless chuck
6. Side handle
7. Torque selector collar
8. Side handle ribs
9. Speed selector
Capacities
Steel Flat Bit Auger Bit
0615-20 1/2" 1-1/2"
0617-20 1/2" 1-1/2"
0625-20 1/2" 1-1/2"
0627-20 1/2" 1-1/2"
9
7
8
3
2
Wood
Screws
Hole Saw Masonry
(dia.)
1-1/8" 2-1/8" 1/4"
1-1/8" 2-1/8" 1/4"
1-1/8" 2-1/8"
1/4"
1-1/8" 2-1/8" 1/4"
5
1
N/A
1/2"
N/A
1/2"